SPECIFICATIONS

• Small form factor: 63.5 x 43.5 x 30 mm (2.5 x 1.71 x 1.18 in).
• Extruded aluminium 6063 T6 (HE9) enclosure.
• CAN Bus Connector: 4 pin pluggable terminal block.
• 2 LEDs for indicating faults and activity: WiFi activity. CAN Bus activity.
• Configuration Mode via a push button.
• Device Firmware Update.

• Supports Standard CAN 2.0A (11 bits ID) and Extended CAN 2.0B (29 bit ID).
• Configurable CAN Bus speed (25, 50, 100, 125, 250, 500, 800, 1000 kbps).
• Configurable filter for logging the desirable CAN Bus messages based on the message ID.
• Configurable 120 Ohms termination resistor.
• Configurable listen only mode or device mode.
• High Electrostatic Discharge (ESD) handling capability on the Bus pins.
• ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 fully compliant CAN Bus transceiver.
• AEC-Q100 qualified CAN Bus transceiver.

• Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
• Up to 20.5 dBm of transmitting power.
• WiFi Protection: WPA/WPA2-Enterprise and WPS.
• Supports the 2.4GHz WiFi band.
• Station and Access Point modes.

• Configurable filters based on the message ID.
• Decode the received CAN Bus messages based on the CAN Bus ID.
• Save the received CAN Bus messages to "CSV" files (comma-separated values).
• Save and load the transmitted CAN Bus messages.
• Maximum messages to transmit: 20.
• Configurable repeating time for the transmitted messages.
• Real-Time OBD-II decode: Service 1 and service 2. PIDs 0x00 to 0x5F.

• Wilde range voltage supply input: from 7V to 28V DC.
• Low power consumption: 62mA @ 12V (0.72W).
• CAN Bus lines protection: 350 W Peak Power Dissipation per Line (8/20 sec Waveform).
• Low Capacitance High−Speed CAN Data Rates.