SPECIFICATIONS

• Standard DIN Rail enclosure (102 x 22.5 x 82 mm).
• 4 LEDs: Power Supply. Isolated Power Supply. CAN Bus 1 Activity. CAN Bus 2 Activity.
• Standard USB mini B port for configuration.
• CAN Bus connectors: 4 x 2 ways pluggable terminal block connectors (included with the device).
• Configurable via USB with a Windows application.
• High performance 32 bits automotive microcontroller.
• Firmware update over USB.

• ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant
• Supports Standard CAN 2.0A (11 bits ID) and Extended CAN 2.0B (29 bit ID).
• Configurable CAN Bus speed (20, 33.333, 45, 50, 80, 90, 100, 250, 500, 800, 1000 kbps).
• Configurable 120 Ohms internal termination resistor.
• High Electrostatic Discharge (ESD) handling capability on the Bus pins.

• Device configuration:
  • CAN Bus speed.
  • Filter for transmitting the desirable CAN Bus messages based on the message ID.
  • 120 Ohms termination resistor.
  • Normal or Silent modes.

• Isolation barrier: 1kV.
• Wilde range voltage supply input: from 9 to 28 Vdc.
• Low power consumption:
  • 46mA @ 12V (0.55W).
  • 23mA. @ 24V (0.55W).
• CAN Bus lines protection: 350 W Peak Power Dissipation per Line (8/20 sec Waveform).
• Low Capacitance High−Speed CAN Data Rates.

* USB mini B cable not included.